⚡ SmartFilter

Find the exact part for your coffee machine

Tutorials and tips


Sage SES880 Disassembly and Descaling

The instructions explain how to open the machine and which parts need to be descaled. Once the machine is open, you can access the pump and the control electronics. I didn't concern myself with the bu
More

Opening Philips EP-Models

For most repairs, you have to open the device. This isn’t a big problem with the EP models. Note: EP 5xxx models are from an older Saeco line. Compare with Saeco Minuto. The instructions can also he
More

Replace Jura ENA micro gear motor

The gear motor can break down over time. A common mistake is that one of the fastening eyes tears out. The machine then just rattles loudly. The motor must then be completely replaced. Note: In the m
More

ECAM 350.55 Test mode

Setting the ECAM models with touch display to test mode is a little tricky. These instructions show you how to do this on the ECAM 350.55, but this guide will also work for other ECAM models, such as
More

DeLonghi ECAM series grinder replace

If the coffee becomes thin, the grindstones may have become blunt. The beans are then only crushed and not cut, making the coffee less aromatic and thin. This can already happen after about 10000 cups
More

Replace lower solenoid valve on Ecam 350.55

Replace lower solenoid valve on Ecam 350.55

If no more coffee comes out, one of the solenoid valves may not be working. To check, you can use the test mode, which will allow you to hear the valves clicking quietly. If you don't hear a click, it
More
%s ...
%s
%image %title %code %s
%s