Pressure hose 200mm for solenoid valve for DeLonghi coffee machines

Looking for a replacement pressure hose because water is leaking from under your DeLonghi coffee machine, or coffee is only dripping through? This 200 mm pressure hose is routed on the solenoid valve, and a cracked hose or hardened seal is a common cause of water leaks and pressure loss. Part no. 5513221371 is the correct replacement component and is supplied complete with the required seals, so once you have confirmed the model you can fit it directly.

Important — verify your model: before ordering, check the exact model and version of your coffee machine (including the series code and version designation, for example EX:4) on the rating label. The label is usually located on the underside of the machine or behind the water tank. This ensures the part fits your unit correctly.

When does this part need replacing? (Fault symptoms)

This part typically fails when you notice one or more of the following symptoms:

• Water or coffee leaking from underneath the machine, or dripping into the drip tray outside the normal outlet
• Coffee flowing very slowly, dripping, or not flowing at all
• The machine losing pressure during brewing, becoming noisier, or producing hissing sounds due to a water leak
• Wet, crumbling coffee grounds in the grounds container that do not form a firm puck

These symptoms will usually lead you to look for a repair before you know the exact part name. If water is escaping directly around the solenoid valve and the cause is not an overfull drip tray or a poorly seated water tank, a cracked or leaking pressure hose is a frequent culprit. Replacing the part together with the included seals restores circuit integrity and the required pressure.

Compatibility: Which models is this part for?

This part is compatible with the following coffee machines:

DeLonghi and DeLonghi Nespresso fully automatic coffee machines

• DeLonghi fully automatic coffee machines in which the pressure hose is routed on the solenoid valve
• DeLonghi Nespresso fully automatic coffee machines with the same solenoid valve arrangement

A full list of model codes for this part is not available in our reference data, so please verify compatibility for your specific series (for example Magnifica, PrimaDonna, Dinamica, ETAM Autentica) against the rating label and part number 5513221371. If in doubt, our service technicians are happy to confirm fitment.

Original vs. compatible part

This is a replacement part for DeLonghi coffee machines listed under part number 5513221371, supplied complete with the required seals. Once you have verified the model against the rating label, you have confidence in the correct fitment and a complete replacement kit without needing to source missing seals separately.

Delivery and returns

The part is in stock and ships within 24 hours from the EU, with expert technical support from our service technicians available throughout. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.