Divider elbow for DeLonghi ECAM 3xx.xx and Rivelia EXAM 44x.xx coffee machines

Is your DeLonghi coffee machine leaking water or failing to push water through the coffee? The distributor elbow (safety valve) with part number AS00006118 is a water-circuit component that directs flow and distributes water inside the machine. When it wears out or develops a leak, water escapes the intended path and the machine stops working correctly. This is the correct replacement part for that component.

Important — verify your model: before ordering, check the exact model designation and version (for example, the series or EX:4 code) on the rating plate of your coffee machine. The plate is usually on the underside of the appliance or behind the water tank. This is the only way to confirm that this part will fit your machine precisely.

When does this part need to be replaced? (Fault symptoms)

This part typically fails when you notice one of the following symptoms:

• Water drips into the drip tray or seeps from under the machine onto the counter
• Coffee flows very slowly, only in drops, or not at all
• The machine does not push through enough water during brewing and only a fraction fills the cup
• An unusual hissing sound is heard inside the machine due to pressure loss, or water runs into the grounds container instead of through the spout

Compatibility: Which models is this part for?

This part is compatible with the following coffee machines:

DeLonghi Dinamica series (ECAM 3xx.xx)

• ECAM 350.50 Dinamica
• ECAM 370.70 Dinamica Plus
• ECAM 3xx.xx (verify the exact designation on the rating plate)

DeLonghi Rivelia series (EXAM 44x.xx)

• EXAM 44x.xx Rivelia (verify the exact designation on the rating plate)

The part is located on the flow heater (part no. 5513214291) and serves as the connector for the silicone hose (part no. 5313217871). If you are unsure whether it fits your specific model, contact our technical support and send us a photograph of the rating plate.

Original vs. compatible part

Brewive supplies this distributor elbow as a replacement part for DeLonghi coffee machines. The part is designed to fit the listed models precisely and to restore correct water-circuit flow. To guarantee fitment, we always recommend verifying the model designation on the rating plate before ordering.

Delivery and returns

The part is in stock and dispatched within 24 hours from the EU; expert technical support from our service technicians is also available. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.