Brew unit for DeLonghi Nespresso Lattissima One EN 500 coffee machines

The brewing unit (brew group) is the heart of your DeLonghi Nespresso Lattissima One capsule coffee machine — it is the component through which pressurised hot water is forced through the inserted capsule. If your coffee flows slowly or only drips, or water has started leaking inside the machine, a worn brewing unit is a common cause. This part, numbered 7313247671, is the correct replacement and is supplied together with a chrome-plated lever handle.

Important — verify your model: before ordering, check the exact model and version of your machine on the rating label (type plate). This is usually found on the underside of the appliance or behind the water tank. Check the full EN 500 range designation (e.g. EN 500.BW) to ensure this part fits your specific machine.

When does this part need to be replaced? (Fault symptoms)

This part typically fails when you notice one or more of the following symptoms:

• Water leaks inside the machine or into the drip tray instead of into the cup
• Coffee flows very slowly, only drips, or does not flow at all despite a capsule being inserted
• Hissing or unusual noises from the machine due to pressure loss
• The lever cannot be fully closed, or water seeps from the capsule compartment

Compatibility: Which models is this part for?

This part is compatible with the following coffee machines:

DeLonghi Nespresso Lattissima One EN 500 series

• EN 500.BW Nespresso Lattissima One
• EN 500.W Nespresso Lattissima One
• EN 500.B Nespresso Lattissima One

If your exact designation (including the suffix after the dot) is not listed, contact our service technicians and we will verify compatibility before you order.

Original vs. compatible part

This is a replacement brewing unit for DeLonghi Nespresso Lattissima One EN 500 series coffee machines, with catalogue number 7313247671. The part is supplied complete with a chrome-plated lever handle, so once you have confirmed the correct model you can be confident of an exact fit.

Delivery and returns

The part is in stock and dispatched within 24 hours from the EU, with our service technicians on hand to help you select the right component. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.