Brew unit complete for Jura F/J/XJ coffee machines

High-quality original complete brew unit for Jura F/J/XJ coffee machines from Jura, which is essential for connecting the grinding of coffee and its brewing. This unit guarantees that coffee will always be correctly brewed and prepared for a perfect espresso experience. If your Jura coffee machine shows the symptoms we describe below, it is time to replace the brew unit.

When is it necessary to replace the brew unit? (Fault symptoms)

The brew unit typically fails when you see one of these symptoms:

• Coffee machine displays error 8 (Error 8, Störung 8) – brew unit is not in the correct position and the machine refuses to operate
• Coffee machine makes unusual mechanical noises during brew unit movement, sounds resembling a sucking noise or the "death rattle" of the coffee machine
• Water goes into the drip tray or into the ground coffee container instead of forcing through the coffee – a sign of pressure leak
• Coffee flows very slowly, in a weak stream or in drops, because the worn unit cannot generate the necessary pressure
• Coffee puck is wet, crumbly and not compact – the unit cannot properly compress and force the coffee through

Compatibility: Which models is this part for?

This part is compatible with the following Jura coffee machines:

Jura Impressa F Series

• Impressa F5
• Impressa F50
• Impressa F50 Classic
• Impressa F55 Classic
• Impressa F7
• Impressa F70
• Impressa F8
• Impressa F85
• Impressa F9
• Impressa F90

Jura Impressa J Series

• Impressa J5
• Impressa J6
• Impressa J7
• Impressa J8
• Impressa J85
• Impressa J9
• Impressa J9.2
• Impressa J9.3
• Impressa J90
• Impressa J95

Jura Impressa XJ Series

• Impressa XJ5 Professional
• Impressa XJ9 Professional
• Impressa XJ9 GII

Warning: This part is designed exclusively for Jura F, J and XJ models. Do not use it for the ENA Micro series or for other Jura series (ENA, E, WE, Z, X) – these models require a different version of the brew unit.

Original vs. compatible part

Brewive supplies the original Jura part with production number 68934. The original part from Jura manufacturer ensures the highest possible quality, precise compatibility with your coffee machine and long-term durability. The brew unit is supplied completely ready for use – it is assembled, contains all necessary O-rings, seals and the drainage valve, which saves you time and complications during installation.

Delivery

In stock and ready to dispatch within 24 hours from the European Union. Professional technical support from Brewive service technicians available.

Frequently Asked Questions