Spare Parts Set XXL for Jura Automatic Coffee Machines

Spare Parts Set XXL for Jura Automatic Coffee Machines Comprehensive repair set for Jura automatic coffee machines. This repair set contains many spare parts that are often needed when servicing Jura machines. The piston seals are the new version in improved quality. With this set, the brew group, the hoses and the water tank connection can be resealed. The gasket set for the drainage valve and the crema valve can be found below in the recommendations. Maintenance instructions for many Jura models can be found further down under Downloads, or at the top of the page under Repair Instructions. Important service note: For older models of the E and F series with push-fit connections on the thermoblock (66820), up to 7 additional hose gaskets with Art. No.: 63444 are required. These must be ordered additionally if needed. Scope of delivery: 2x O-ring for the pistons of the brew group 10x O-ring for the pressure hose 2x O-ring for the riser pipe of the brew group 1x O-ring inlet connector 2x O-ring steam pipe 1x O-ring pump 1x gasket for the water tank (inner distribution sleeve) 2x retaining washers 2x clamp water line 6x housing screws (also for the rear wall) 4x applicator for subsequent greasing of the brew group 6g multi silicone grease food safe (-45 to 200°C)