Pump SAP.HP4.V03 EU Nivona / Jura

The water pump SAP.HP4.V03 is a spare part for various Nivona and Jura coffee machine models. Customers most often look for it when their machine has stopped pushing water at full pressure — coffee flows weakly, tastes watery or comes out lukewarm. When the pump can no longer generate adequate pressure, it negatively affects the taste, flow rate and temperature of the coffee. This is the correct replacement part to restore original pressure to the water circuit.

Important — verify your model: before ordering, check the exact model and version of your machine on the rating label (usually on the underside of the appliance or behind the water tank). Also verify the pump parameters (230 V / 65 W / 50 Hz) and the connection type to ensure this part fits your machine correctly.

When does this part need replacing? (Fault symptoms)

This part typically fails when you notice one or more of the following symptoms:

• Coffee flows very slowly, in drops, or not at all
• Coffee tastes watery, weak and produces no crema, even though grind and dosing are set correctly
• The pump is noticeably louder than before — gurgling, squealing or struggling
• The machine fails to reach full pressure and the resulting coffee is cooler than usual

Compatibility: Which models is this part for?

This spare part is the water pump SAP.HP4.V03 in the EU version (230 V / 65 W / 50 Hz) with a clamp-secured pressure-side connection.

Nivona coffee machines

• Water pump SAP.HP4.V03 for various Nivona coffee machine models

Jura coffee machines

• Water pump SAP.HP4.V03 for Jura coffee machine models

Note on exact compatibility: a full model list is not available for this part. Because pressure ratings, electrical parameters and connection types vary between series, please verify the type designation on your machine's rating label and compare it against the pump parameters before ordering. If you are unsure, contact our technical support team and we will check the compatibility together.

Original vs. replacement part

We supply this as a replacement part — water pump SAP.HP4.V03 in the EU version rated at 230 V / 65 W / 50 Hz. For correct operation it is essential that the voltage, power rating and pressure-side connection type all match; we therefore recommend verifying the parameters before installation. Our service department is happy to assist you in making the right choice.

Delivery and returns

The part is in stock and dispatched within 24 hours from the EU; expert technical support from our service technicians is also available. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.