Maintenance Set XXL Premium Spare Parts for Jura Automatic Coffee Machines

Maintenance Set XXL Premium Spare Parts for Jura Automatic Coffee Machines Comprehensive maintenance set with special tool and care cloth for Jura automatic coffee machines. The set contains all the important gaskets for the brew group, the drainage valve, the water tank connection and the hoses. For opening the machine, the maintenance set includes an oval head key. So that the Jura machine can be cleaned gently but thoroughly after the maintenance is completed, the set also includes an original Jura care cloth. The silicone grease for the gaskets and the brew group is food safe, odourless and tasteless. In addition, the set also contains a few hose clamps, housing screws, a hose brush and the two retaining rings for the shaft of the brew group. The crema valve for the brew group and the repair set for the outlet valve can be found further down in the recommendations. Maintenance instructions for many Jura models can be found further down under Downloads, or at the top of the page under Repair Instructions. Important service note: For older models of the E and F series with push-fit connections on the thermoblock (66820), up to 7 additional hose gaskets with Art. No.: 7758775 are required. These must be ordered additionally if needed. Scope of delivery: 2x Premium O-ring for the pistons of the brew group 2x Premium grooved ring in the drainage valve 10x Premium O-ring for the pressure hose 2x Premium O-ring for the riser pipe of the brew group 1x Premium O-ring inlet connector on the drainage valve 1x Premium O-ring pump connection 2x Premium O-ring steam pipe 2x retaining washers 1x Premium gasket for the water tank (inner distribution sleeve) 4x clamp water line 6x housing screws (also for the rear wall) 4x applicator for subsequent greasing of the brew group 1x oval head key as a bit insert 1x original Jura care cloth for final cleaning 1x hose brush 6g multi silicone grease (-45 to 200°C)