Maintenance kit Jura brew group 68934, 69124 & 72521 Complete

Maintenance kit Jura brew group 68934, 69124 & 72521 Complete Complete spare parts kit for the full Jura brew group with article no.: 68934, 69124 (67818) and 72521. The kit contains all the parts needed to overhaul the brew group and the drainage valve. Both hoses for the coffee spout are also included in the kit. The hose for the coffee spout can be cut to the required length with a knife or scissors. The silicone grease for the gaskets and the brew group is food-safe, odourless and tasteless. Maintenance instructions for many Jura automatic coffee machines can be found at the top of the page under Repair Instructions. Fitting the cap for the valve pin: Pull the old plastic cap off the metal pin. Place the new cap onto the valve pin and tap it on carefully with a (rubber) hammer. Scope of delivery: 2x gasket for the brew pistons, 1x crema valve for the brew group, 1x stainless steel crema screen, 2x gasket for the standpipe, 1x gasket for the inlet nozzle on the drainage valve, 1x gasket set for the Jura drainage valve, 2x retaining washer for the brew group shaft, 1x connector at the coffee spout with gasket, 1x silicone hose for the coffee spout, 1x hose at the top of the brew group, 1x hose clamp, 1x housing screw for the drainage valve, 1x cap for the valve pin on the drainage valve, 6g multi silicone grease (-45 to 200°C)