Gasket for Jura ENA 8, ENA Micro Impressa A-, E-, F-, J-, X- Z

This drainage valve gasket is a critical replacement part for Jura ENA 8, ENA Micro and Impressa series coffee machines. It is located in the lower section of the brew unit on the discharge valve, where it connects the brew unit to the appliance's fluid system. If your coffee machine accumulates excess water in the drip tray, coffee does not flow correctly, or you see leaks under the machine, this gasket is often the cause of the problem.

When does this part need replacing? (Fault symptoms)

This gasket typically fails when it becomes worn or hardens. You need replacement in these cases:

• Too much water accumulates in the drip tray during coffee preparation or when rinsing the appliance
• Water leaks from under the coffee machine, specifically from the brew unit area
• Coffee flows very slowly, weakly or does not flow at all – instead, water is discharged directly into the waste tray
• Coffee grounds in the ejector are too wet, fall apart and do not form a solid puck

Compatibility: Which models is this part for?

This gasket with part number 64919 is compatible with the following Jura coffee machines:

Jura ENA Series

• Jura ENA 8
• Jura ENA Micro

Jura Impressa A Series

• Jura Impressa A1
• Jura Impressa A5
• Jura Impressa A7
• Jura Impressa A9

Jura Impressa E Series

• Jura Impressa E5
• Jura Impressa E10
• Jura Impressa E20
• Jura Impressa E25
• Jura Impressa E30
• Jura Impressa E40
• Jura Impressa E45
• Jura Impressa E50
• Jura Impressa E55
• Jura Impressa E60
• Jura Impressa E65
• Jura Impressa E70
• Jura Impressa E74
• Jura Impressa E75
• Jura Impressa E80
• Jura Impressa E85

Jura Impressa F Series

• Jura Impressa F5
• Jura Impressa F7
• Jura Impressa F8
• Jura Impressa F9
• Jura Impressa F50
• Jura Impressa F50 Classic
• Jura Impressa F55
• Jura Impressa F55 Classic
• Jura Impressa F70
• Jura Impressa F90
• Jura Impressa F85

Jura Impressa J Series

• Jura Impressa J5
• Jura Impressa J6
• Jura Impressa J7
• Jura Impressa J9
• Jura Impressa J9.2
• Jura Impressa J9.3
• Jura Impressa J9.4

Jura Impressa X Series

• Jura Impressa X7
• Jura Impressa X9
• Jura Impressa X70
• Jura Impressa X90
• Jura Impressa X95

Jura Impressa Z Series

• Jura Impressa Z5
• Jura Impressa Z6
• Jura Impressa Z7
• Jura Impressa Z9

Original vs. compatible part

This replacement part is an original product from Jura with part number 64919. The original gasket ensures precise dimensions, material durability and long service life that your coffee machine requires. Using the original part guarantees correct drainage valve function and maintains the pressure needed for quality coffee preparation.

Delivery

This part is in stock and we dispatch within 24 hours from the EU. For all questions, we provide expert technical support from service technicians with experience in Jura coffee machines.

Frequently Asked Questions