Brew Unit Jura 62100 | Brewive.com
⚡ SmartFilter

Search for a spare part by coffee machine model

Brew unit for Jura C-, D-, E-, F-, S- and X-

star 1star 2star 3star 4star 5 (1) Rating value is 5 of 5
Brew unit for Jura C-, D-, E-, F-, S- and X-
Price
$ 106.51 excl. VAT
Manufacturer
Jura
Product code
62100
In stock
Brew unit 62100 is an original Jura spare part, complete with seals and drainage valve. Fits Jura coffee machines series C-, D-, E-, F-, S- and X-. In stock with shipping within 24 hours from EU, professional technical support from service technicians. More
Add to favourites Add to compare list Shipping and Payment

Brew unit 62100 is the central component of your Jura fully automatic coffee machine. If your machine makes unusual sounds, coffee flows unusually slowly or does not flow at all, or the wet coffee puck does not hold its shape, the cause is often a leaking or worn brew unit. This original part from Jura is supplied fully assembled with seals and drainage valve, ready for immediate installation.

When does this part need replacing? (Fault symptoms)

This part typically fails when your coffee machine starts showing these symptoms:

  • Water leaks into the drip tray or under the machine, not into the cup – pressure loss through damaged seals
  • Coffee flows very slowly, in drips, or does not flow at all – lost pressure in the brew chamber
  • Machine makes hissing or crackling sounds during coffee preparation – air entering through leaks
  • Coffee puck is wet, falls apart and does not form a solid disc – brew chamber not compressing correctly

These symptoms clearly indicate that the brew unit has lost its seal or the internal piston surfaces are worn. If not repaired in time, damage to other components (valves, pump, electronics) may occur.

Compatibility: Which models is this part for?

This part is compatible with Jura fully automatic coffee machines in these series:

Jura C series (Impressa C)

  • C5
  • C50
  • C55
  • C60
  • C65
  • C70
  • C75
  • C9
  • C90

Jura D series

  • All models in the D range (older series)

Jura E series (Impressa E)

  • E5
  • E10
  • E20
  • E25
  • E30
  • E40
  • E45
  • E50
  • E55
  • E60
  • E65
  • E70
  • E74
  • E75
  • E80
  • E85

Jura F series (Impressa F)

  • F5
  • F7
  • F9
  • F50
  • F50 Classic
  • F55 Classic
  • F70
  • F85
  • F90

Jura S series (Impressa S)

  • S7 Avantgarde
  • S9
  • S9 Avantgarde
  • S9 One Touch
  • S50
  • S55
  • S70
  • S75
  • S85
  • S90
  • S95

Jura X series (Impressa X)

  • X5
  • X7
  • X9
  • X70
  • X90
  • X95
  • XF50
  • XF70
  • XS9 Classic
  • XS90
  • XS90 One Touch
  • XS90 One Touch Aroma+
  • XS95
  • XS95 One Touch
  • XS95 One Touch Aroma+

Other compatible models (older Impressa range)

  • Impressa 300
  • Impressa 500
  • Impressa Scala
  • Impressa Scala Vario
  • Impressa Ultra
  • Impressa Evolution
  • Impressa Cappuccinatore

Check the model on the coffee machine rating plate: You will find the machine model on the label on the bottom of the machine, in the manual or on the original box. If you are not sure, write to us with your type and we will verify compatibility within 24 hours.

Original vs. compatible part

This part is an original Jura spare part, manufactured to strict Swiss standards. Original Jura parts are tested for 400,000 cycles under extreme conditions, and brew units are designed for a minimum of 20,000 cycles of real use. Using original parts ensures no damage to the hydraulic system or machine electronics, and preserves the right to service history recorded in the Jura diagnostic system. Compatible replacements may have different piston seals and lead to pressure loss or failure of thermoregulation sensors.

Delivery

We have the goods in stock and ship within 24 hours from EU. Our service technicians will provide you with professional technical support in selecting the right part and during installation – just write to us with your coffee machine model.

Frequently Asked Questions

Is this part compatible with my Jura Impressa E60 coffee machine?

Yes, brew unit 62100 is compatible with all models in the Jura E series, including E60. It fits series C, D, E, F, S and X. To verify, check the rating plate on the bottom of your coffee machine.

Is this an original Jura part or compatible?

This is an original Jura spare part, manufactured to Swiss standards and tested for 400,000 cycles. It is supplied fully assembled with seals and drainage valve.

How quickly can you deliver this part to Slovakia?

We have the goods in stock and ship within 24 hours from EU. Our service technicians will also provide professional support during installation if you need it.

Parameters
Compatible with S9 One Touch Impressa, XS9 Classic, XS90 Impressa, XS90 One Touch Impressa, XS95 Impressa, XS95 One Touch Aroma+ Impressa, XS95 One Touch Impressa, XS90 One Touch Aroma+ Impressa, S9 Avantgarde Impressa, C5 Impressa, C50 Impressa, C55 Impressa, C60 Impressa, C600, C65 Impressa, C70 Impressa, C75 Impressa, C9 Impressa, C90 Impressa, E10 Impressa, E20 Impressa, E25 Impressa, E45 Impressa, E80 Impressa, E85 Impressa, F5 Impressa, F50 Classic Impressa, F55 Classic Impressa, F70 Impressa, F85 Impressa, D6, D60, S9 Classic Aroma+ Impressa, F50 Impressa, F90 Impressa, XF50 Impressa, XF70 Impressa, S7 Avantgarde Impressa, S85 Impressa, S9 Impressa, X90 Impressa, X95 Impressa, E30 Impressa, E40 Impressa, E50 Impressa, E55 Impressa, E60 Impressa, E65 Impressa, E70 Impressa, E74 Impressa, E75 Impressa, Impressa 300, Impressa 500, Impressa Cappuccinatore, Impressa Evolution XT, Impressa Scala Vario, C Limited Edition Impressa, S50 Impressa, XF50 Classic Impressa, E5 Impressa, Impressa Scala, S55 Impressa, S70 Impressa, S75 Impressa, S90 Impressa, S95 Impressa, X70 Impressa, XF500 Impressa, D4, Impressa Ultra

Jura coffee machine – Error 8 (Störung 8)

Why does my Jura coffee machine show Error 8?

Error 8 (Störung 8) means the brew unit is not in the correct position.

Typical symptoms:

  • Coffee machine does not brew coffee
  • Loud noise resembling a drill
  • Error message appears repeatedly

The problem develops gradually – first occasional messages, later complete failure. In most cases, the cause is a worn brew unit that cannot return to its home position.

After replacing the brew unit, Error 8 disappears and the coffee machine operates quietly and reliably again.

Manufacturing company JURA Elektroapparate AG
Address Kaffeeweltstrasse 10, 4626 Niederbuchsiten, CH

Related products6

Next
%s ...
%s
%image %title %code %s
%s
< <