Water filter for Jura Claris blue+ coffee machines

The Jura Claris Blue+ water filter with part number 24228 is among the latest generation of filter cartridges for Jura fully automatic coffee machines. If your coffee machine reports the need for filter replacement, or you notice deteriorated coffee taste or increased limescale deposits in the tank, this genuine replacement part ensures that your appliance will once again operate with optimal water quality. Coffee is 98% water – its quality determines the taste and longevity of your coffee machine.

When does this filter need replacing? (Fault symptoms)

The Jura Claris Blue+ 24228 water filter must be replaced regularly to maintain its functionality. This part typically fails or requires replacement when you notice any of these symptoms:

• The coffee machine displays a filter replacement message or descaling requirement (on models with intelligent water system I.W.S.®)
• White or brown limescale deposits settle in the water tank, particularly on the bottom and walls
• Coffee begins to taste unpleasantly bitter, metallic, or has a strange odour reminiscent of tap water chlorine
• The filter has been in the coffee machine for more than 2 months or you have filtered more than 50 litres of water through it (filter capacity is exhausted)

Compatibility: Which models is this part for?

This genuine Jura Claris Blue+ water filter (24228) is compatible with a wide range of Jura fully automatic coffee machines. The filter is inserted directly into the water tank and fits these series and models:

Jura A Series

• A1
• A5
• A7
• A9

Jura ENA Series

• ENA 5
• ENA 7
• ENA 9
• ENA micro 1
• ENA micro 5
• ENA micro 8
• ENA micro 9
• ENA micro 90
• ENA micro easy

Jura F Series

• F7
• F8
• F9
• F50 (manufactured after 2009, All Black version)
• F50 Classic
• F55
• F85
• F95
• F900

Jura GIGA Series

• GIGA 5

Jura IMPRESSA Series

• IMPRESSA A5
• IMPRESSA A9
• IMPRESSA C5 (New Edition, manufactured after September 2009)
• IMPRESSA C9 (manufactured after September 2009)
• IMPRESSA C55
• IMPRESSA C60
• IMPRESSA F7
• IMPRESSA F8
• IMPRESSA F50
• IMPRESSA F50 Classic
• IMPRESSA F55
• IMPRESSA F85
• IMPRESSA F95
• IMPRESSA J7
• IMPRESSA J9
• IMPRESSA J9.3
• IMPRESSA J80
• IMPRESSA J85
• IMPRESSA S9
• IMPRESSA Z7
• IMPRESSA Z9

Jura J Series

• J6
• J10
• J90
• J95
• J500

Note: If you are unsure whether this filter is suitable for your specific Jura coffee machine model, check the filter type according to the connection shape on the bottom of the water tank. The Claris Blue+ filter has a hexagonal connection. Contact our technical support and we will send you a photograph of the tank with the filter holder.

Genuine Jura part – why it matters

This filter is a genuine Jura replacement part (OEM) with production number 24228. Compared to generic compatible filters, it offers precise specification of ion exchange granulate and activated carbon, calibrated for the electronically controlled water systems of Jura coffee machines. The lower section of the filter contains a depot with natural active ingredients that stabilise water in the tank and reduce limescale deposits even outside the filtration path. When using the genuine Claris Blue+ filter, you do not need to descale your coffee machine – the appliance automatically disables descaling mode. When using non-genuine filters, the coffee machine may fail to recognise the filter correctly, leading to incorrect maintenance cycles and long-term damage to the thermoblock. Brewive supplies exclusively genuine parts with full compatibility and functionality warranty.

Delivery

We have the item in stock and dispatch within 24 hours from our central EU warehouse. With your purchase we provide expert technical support from service technicians – if you are unsure about compatibility or the filter replacement procedure, contact us before ordering.

Frequently Asked Questions