Repair kit for coffee grinder for Jura coffee machines

Prix

73,90 € TTC

Fabricant

Code produit

15464

This ring, as well as the coffee grinder for your Jura coffee machine with Aroma+ and HS-Plus (70025), can be damaged by foreign bodies that may be in the coffee beans or wear out after some time (thin coffee). The taste of the coffee is usually weaker. You can often tell if the grinding cone is worn by the thickness of the pulp cake, and then replace it if it is no longer grinding enough beans.

Ajouter aux favoris Ajouter à la comparaison Livraison et paiement

Paramètres

Compatible with	J500, J85 Impressa, J9.3 Impressa, J90, J95, XJ5 GII Impressa, XJ5 Impressa, XS9 Classic, XS95 One Touch Aroma+ Impressa, Z9 Impressa, XS90 One Touch Aroma+ Impressa, A5 Impressa, A7, A9 Impressa, E6, E60 ab 2015, E8, E8 Model 2018, E80 ab 2015, ENA Micro 9, J6, J9.4 Impressa, S8, S80, WE6, WE8, X10, X6, X8, XJ9 GII Impressa, XJ9 Impressa, Z6, Z8, J90 (EA), C55 Impressa, C65 Impressa, C90 Impressa, E6 (EB), E6 (EC), E6 (ECS), E600, ENA 7 Aroma+, ENA 8, ENA 8 two cups, ENA 9, F55 Classic Impressa, F7 Impressa, F8 Impressa, F85 Impressa, F9 ab 2015, F900 Expert, D6, D60, S9 Classic Aroma+ Impressa, ENA Micro Easy, E800, Z6 Model 2018, Z8 Model 2018, D4, E8 (EB), ENA 4 (EB), J8 (EA), S8 (EA), Z10, A1, ENA Micro 1, ENA Micro 5, E4, ENA 4 (EA), WE50, X8 (EA)

Compatible with

J500, J85 Impressa, J9.3 Impressa, J90, J95, XJ5 GII Impressa, XJ5 Impressa, XS9 Classic, XS95 One Touch Aroma+ Impressa, Z9 Impressa, XS90 One Touch Aroma+ Impressa, A5 Impressa, A7, A9 Impressa, E6, E60 ab 2015, E8, E8 Model 2018, E80 ab 2015, ENA Micro 9, J6, J9.4 Impressa, S8, S80, WE6, WE8, X10, X6, X8, XJ9 GII Impressa, XJ9 Impressa, Z6, Z8, J90 (EA), C55 Impressa, C65 Impressa, C90 Impressa, E6 (EB), E6 (EC), E6 (ECS), E600, ENA 7 Aroma+, ENA 8, ENA 8 two cups, ENA 9, F55 Classic Impressa, F7 Impressa, F8 Impressa, F85 Impressa, F9 ab 2015, F900 Expert, D6, D60, S9 Classic Aroma+ Impressa, ENA Micro Easy, E800, Z6 Model 2018, Z8 Model 2018, D4, E8 (EB), ENA 4 (EB), J8 (EA), S8 (EA), Z10, A1, ENA Micro 1, ENA Micro 5, E4, ENA 4 (EA), WE50, X8 (EA)

Jura coffee machine – makes bad coffee

If your Jura coffee machine makes coffee with a bad taste – too bitter, sour, or weak – the cause is almost always a worn grinder. Dull or damaged burrs cannot grind beans properly, which directly affects extraction and the taste of every cup.

The problem usually develops gradually – first a subtle change in taste, then increasingly noticeable. A worn grinder produces uneven grounds – some particles too coarse, others too fine, causing over-extraction or under-extraction.

The solution is to replace the burrs or the entire grinder. After replacement, your Jura coffee machine will again produce coffee with full, balanced taste like new.

Nájdite presný diel pre váš kávovar

Repair kit for coffee grinder for Jura coffee machines

Jura coffee machine – makes bad coffee

Jura coffee machine – makes bad coffee

Oval head bit for opening Jura fully automatic coffee machines

Descaling tablets 9pcs for Jura coffee machines

Water filter for Jura Claris SMART+ coffee machines

Water filter for Jura Claris blue+ coffee machines

Descaling tablets 36 pieces for Jura coffee machines

Milk system cleaning container for Jura E8/J8 coffee machines

Repair kit for coffee grinder for Jura coffee machines

Nájdite presný diel pre váš kávovar

Jura coffee machine – makes bad coffee

Produits associés6