Nivona error 8? Brew unit repair and parts | Brewive - Compatible with - NICR777
⚡ SmartFilter

Search for a spare part by coffee machine model

Nivona error 8 - Compatible with - NICR777

Error 8 on Nivona means the brew unit isn't moving correctly, most often due to a worn gear or dirt.

Error 8 on Nivona machines signals a fault in the brew unit drive. When its movement jams, the machine shows Error 8.

Most common causes

  • Worn or cracked plastic drive gear
  • Dirty and dried brew unit (too much mechanical resistance)
  • Faulty motor with drain valve (turns one way only)
  • Faulty position sensor or control electronics

What to check first

  • Remove and thoroughly clean the brew unit, if the model allows
  • Grease the unit with suitable grease
  • If the error comes back, it's the drive or the electronics

How to find the right part

On the left, filter by your machine's brand and model. Only the parts that fit will show, each with its compatible models listed. If you're not sure, write to us.

Related parts

Brew unit · Electronics and motherboards

Frequently asked questions

Is error 8 the same as on Jura?

The symptom is the same, the unit doesn't reach position, but the cause differs. On Nivona it's almost always a cracked or worn plastic gear in the drive, not the motor like on Jura. That gear is available as a spare part and gets replaced.

Can it be fixed at home?

Cleaning and greasing the unit, yes. Replacing the gear means dismantling the drive, it's doable with our tutorial and a torx set, but it takes patience and it's best to take photos while disassembling.

Related faults

Jura error 8 · DeLonghi general alarm

%s ...
%s
%image %title %code %s
%s
< <