Water tank for Nivona CafeRomatica coffee machines

Looking for a replacement water tank for your Nivona CafeRomatica coffee machine because the original is cracked, leaking, or allowing water to escape underneath the appliance? The water tank with catalogue number 77268 is the correct replacement part for Nivona CafeRomatica fully automatic coffee machines of the NICR 5xx, 6xx and 7xx series, and is supplied complete with handle and drain valve.

Important — verify your model: before ordering, check the exact designation and version of your coffee machine on the rating label (NICR type code and type number, e.g. NICR 757 – Type 507). The label is typically found on the underside of the appliance or in the compartment behind the water tank. This confirms that this part will fit correctly.

When does this part need to be replaced? (Fault symptoms)

This part typically fails when you observe one or more of the following symptoms:

• Water leaks from underneath the coffee machine or into the recess where the water tank sits
• The tank has cracked plastic or a hairline fracture and drips after filling
• The coffee machine displays a low-water or "refill water" alert even though the tank is full, because the drain valve is no longer sealing
• The tank handle is broken and the tank cannot be removed or reinserted comfortably

Compatibility: Which models does this part fit?

This part is compatible with the following Nivona CafeRomatica coffee machines:

NICR 5xx series

• NICR 520
• NICR 525
• NICR 530
• NICR 550
• NICR 560

NICR 6xx series

• NICR 626
• NICR 646
• NICR 656
• NICR 660
• NICR 670
• NICR 675
• NICR 680
• NICR 690
• NICR 695

NICR 7xx series

• NICR 757
• NICR 758
• NICR 759
• NICR 760
• NICR 767
• NICR 768
• NICR 769
• NICR 777
• NICR 778
• NICR 779
• NICR 788
• NICR 789
• NICR 790
• NICR 795
• NICR 796
• NICR 799

Original vs. compatible part

This is a replacement water tank supplied as a complete assembly — including handle and drain valve — so after fitting you have a fully functional unit with no need to source additional components. When your model is correctly verified against the list above, you can be confident the part will seat precisely.

Delivery and returns

The part is in stock and dispatched within 24 hours from the EU; expert technical support from our service technicians is available. An unused, un-installed part may be returned within 14 days under the statutory right of withdrawal.