Steam nozzle for KRUPS EVIDENCE EA 89xx automatic coffee machine

The steam nozzle Krups MS8030000134 is a spare part for Krups Evidence EA89xx automatic espresso machines. Customers most commonly search for it when the machine has stopped frothing milk and is now delivering only warm, unfoamed milk, or when the nozzle is blocked with dried milk residue. If you have identified this symptom, this nozzle is the correct spare part to restore the frothing and steam-dispensing function.

Important — verify your model: before ordering, confirm the exact model and version of your machine (for example EA890110, EA891110, EA891C10) on the rating plate. The plate is usually located on the underside of the appliance or behind the water tank. This ensures the part will fit your machine precisely.

When does this part need to be replaced? (Fault symptoms)

This part typically fails when you observe one or more of the following symptoms:

• The machine does not froth milk and delivers only warm milk with no foam
• Steam output from the steam nozzle is weak or completely absent
• The nozzle is blocked with dried milk residue and cannot be cleared with the supplied cleaning needle
• Milk foam is thin, uneven or collapses quickly, even after the milk system has been cleaned

Many customers do not know the part name and search using the symptom itself. If you have already disassembled the nozzle, cleared the openings with the needle and run a cleaning cycle but the problem persists, a worn or permanently clogged nozzle is the most common cause. In that case, replacing the nozzle is a straightforward, low-cost solution that does not require a professional service call.

Compatibility: Which models does this part fit?

This part is compatible with the following machines:

Krups Evidence series (EA89xx)

• Krups Evidence EA89xx (EA89 range)

Verify the exact model designation of your machine (for example EA890110, EA891110, EA891C10) on the rating plate as described above. As a complete list of type numbers was not supplied with this part, if you have any doubt about exact compatibility please contact our expert technical support before ordering and we will check it for you.

Original vs. compatible spare part

For every part we list, we state whether it is an original or a compatible spare. For this part we have received only the part number MS8030000134; its origin (original or compatible spare) will therefore be confirmed by our technical support team before you order, so you can be certain of the correct part and fit for your machine.

Delivery and returns

The part is in stock and dispatched within 24 hours from the EU. Our expert technical support team with qualified service technicians is on hand to advise you on both selection and installation. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.