If your coffee tastes weak, flows very slowly, or wet and dry coffee grounds are building up in the waste container, the cause is usually a worn brewing unit. The genuine Philips/Saeco brewing unit 421944052461 (also known as 8G/5BAR V3) is the key component responsible for the entire brewing process and is the correct replacement part to restore your machine's performance.
Important — verify your model: Before ordering, check the exact model and version of your machine on the rating plate (type label), which is normally located on the underside of the appliance or behind the water tank. Compare the model number (for example EP3246 or type code HD/SUP) with the compatibility list below to confirm the part will fit correctly.
When does this part need to be replaced? (Fault symptoms)
This part typically fails when you notice one or more of the following symptoms:
- Water leaks into the drip tray or under the machine during drink preparation
- Coffee flows very slowly, drips, or does not flow at all
- The machine produces unusual hissing sounds during brewing due to pressure loss
- The ejected coffee puck is wet and crumbles instead of forming a firm, solid disc
Compatibility: Which models is this part for?
This part is compatible with the machines listed below. Use the prefix of your model code to find the relevant series:
Philips 1200 series
- EP1220
Philips 2200 series
- EP2220
Philips 3200 / 3300 series
- EP3221
Philips 4300 series
- EP4346
Philips 5400 series
- EP5447
Saeco Incanto
- Incanto range models
Saeco PicoBaristo
- PicoBaristo range models
Saeco Xelsis
- Xelsis range models
Saeco Minuto
- Minuto range models
Saeco Moltio
- Moltio range models
Genuine vs. compatible part
Brewive supplies the genuine Philips/Saeco brewing unit 421944052461, which means reliable fitment with the original mechanism and long service life. To confirm the correct fit, compare your machine's type code with the list above; if you are unsure, our service technician will help you choose the right part.
Delivery and returns
The part is in stock and dispatched within 24 hours from the EU; expert technical support from our service technicians is also available. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.
Frequently Asked Questions
How do I check whether this part will fit my machine?
Check the type label on the underside of the appliance or behind the water tank and compare the model code (for example EP3221 or type code HD/SUP) with the compatibility list above. Part 421944052461 is designed for multiple Philips series (1200 to 5400) and Saeco ranges (Incanto, PicoBaristo, Xelsis, Minuto, Moltio).
Is this a genuine or compatible part?
This is the genuine Philips/Saeco brewing unit with code 421944052461, also known as 8G/5BAR V3. A genuine part guarantees precise fitment with the original mechanism and reliable coffee extraction.
How quickly will I receive the part, and can I return it?
The part is in stock and dispatched within 24 hours from the EU. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.

Brewing unit gasket replacement
| Manufacturing company | Versuni Holding B.V. |
|---|---|
| Address | Claude Debussylaan 88, 1082 MD Amsterdam, NL |
| info@versuni.com |





















