Premium maintenance kit XL Jura ENA Micro V1

Premium maintenance kit XL Jura ENA Micro V1 Large kit with premium gaskets and small parts for the maintenance of the Jura ENA Micro and A Series automatic coffee machines listed below. The O-ring for the coffee spout (art. no.: 71416) of the Jura ENA Micro 5 must be ordered separately. The second version of this premium maintenance kit for the other A Series and Micro models can be found under article number 15283 in our online shop. Maintenance instructions for many Jura models can be found further down under Downloads, or at the top of the page under Repair Instructions. Scope of delivery: 2x premium O-ring for the brew group pistons, 2x premium O-ring standpipe, 3x premium lip seal in the drainage valve, 1x premium O-ring inlet nozzle on the drainage valve, 1x premium O-ring outlet nozzle on the drainage valve, 1x cap for the valve pin on the drainage valve, 4x applicators for re-greasing, 5x housing screw, 1x inner distribution sleeve, 5x clip for the hose connection, 2x clip for fluid connector on thermoblock, 1x premium shaped gasket, crema valve, with stainless steel spring, 1x screen for the tank base, 8x premium pressure hose gasket, 2x retaining washer for the brew group shaft, 1x hose clamp 7.0-7.5mm, 1x retaining plate with clamping spring, 1x spring for the tappet on the drainage valve, 1x 6g multi silicone grease, food-safe (-45 to 200°C)