The O-ring ORM 0090-20 (10208P) is a replacement seal designed for the discharge spout of Philips fully automatic espresso machines. If water is pooling in the drip tray or leaking underneath the machine, a worn discharge spout seal is the most common cause. This O-ring is the correct replacement part to restore a tight coffee outlet seal and stable brew pressure.
Important — verify your model: before ordering, check the exact model and version of your machine (for example the HD or EP type code and its version) on the rating label. The label is normally located on the underside of the machine or behind the water tank. Confirming the exact model ensures this part will fit.
When does this part need replacing? (Fault symptoms)
This O-ring typically fails when you notice one or more of the following symptoms:
- Water pools in the drip tray after a single coffee, or drips from underneath or from the side of the machine
- Coffee flows very slowly, only in drops, or barely flows at all
- The machine hisses or spits unusually during brewing — a sign of pressure loss through a worn seal
- The spent coffee puck is wet and crumbles instead of forming a firm, dry disc
Compatibility: Which models does this part fit?
This O-ring is a replacement part for the discharge spout of Philips fully automatic espresso machines in the following ranges:
Philips EP Series
- Philips EP range fully automatic espresso machines with a removable brew unit and discharge spout
Philips HD Series
- Philips HD range fully automatic espresso machines with a removable brew unit and discharge spout
Note: no exact list of compatible models was supplied in the product parameters, so we list the ranges for which this part is intended. If you are unsure whether this O-ring fits your specific model, send us the model code from the rating label and our technicians will verify compatibility.
Genuine vs. compatible part
Brewive supplies this O-ring ORM 0090-20 (10208P) as a genuine spare part with a compatibility guarantee. The genuine seal has the correct dimensions and a material resistant to heat and pressure, so it seats precisely in the discharge spout groove and seals reliably.
Delivery and returns
The part is in stock and dispatched within 24 hours from the EU; expert technical support from our service technicians is also available. An unused, uninstalled part may be returned within 14 days under the statutory right of withdrawal.
Frequently Asked Questions
How do I check whether the O-ring ORM 0090-20 fits my Philips machine?
Check the exact model code and version on the rating label, which is normally on the underside of the machine or behind the water tank. The part is intended for the discharge spout of Philips EP and HD range fully automatic espresso machines. If you are unsure, send us the model code and our technicians will verify compatibility.
Is this part genuine or compatible?
Brewive supplies the O-ring ORM 0090-20 (10208P) as a genuine spare part with a compatibility guarantee. It has the correct dimensions and a material resistant to heat and pressure so that it seals reliably in the discharge spout groove.
When will I receive the part, and can I return it?
The part is in stock and dispatched within 24 hours from the EU. An unused, uninstalled O-ring may be returned within 14 days under the statutory right of withdrawal.
Martin B. Verified review
Verified review from a customer who purchased the product.
| Manufacturing company | Versuni Holding B.V. |
|---|---|
| Address | Claude Debussylaan 88, 1082 MD Amsterdam, NL |
| info@versuni.com |















