The milk suction tube with number AS00007793 is a replacement part for DeLonghi Magnifica Evo Next coffee machines, used to draw milk from the container when preparing milk-based drinks. If your machine has stopped drawing milk properly, or only warm milk without foam comes out of the spout, a worn, cracked, or leaking suction tube is a common cause, and replacing it is the correct first step.
Important — check your model: before ordering, verify the exact model designation and version of your coffee machine. The rating plate is usually found on the underside of the unit or behind the water tank. Check that your machine belongs to the Magnifica Evo Next range so that this part fits correctly.
When does this part need to be replaced? (Symptoms of failure)
This part typically needs replacing when you notice one of the following symptoms:
- The machine does not draw milk from the container, or draws it only weakly and irregularly
- Only warm milk without foam comes out of the spout, even though the milk system is clean and correctly fitted
- The tube is visibly cracked, broken, deformed, or hard and inflexible
- Air is being drawn into the milk circuit and frothing is unstable or insufficient
Before replacing the part, make sure the problem is not simply caused by a dirty milk system — dried milk residue in the container and tube is a common cause of poor frothing. If thorough cleaning does not help and the tube is damaged, replacement is the right solution.
Compatibility: Which models is this part for?
This part is intended for the following range of coffee machines:
DeLonghi Magnifica Evo Next range
- DeLonghi Magnifica Evo Next
Since exact model codes (e.g. ECAM) were not provided for this part, before ordering compare the part number AS00007793 with the rating plate or the original part in your coffee machine. If you are unsure, our technical support team can help you verify compatibility.
Original vs. compatible part
This part is listed under the original DeLonghi number AS00007793. Verifying the part number against your coffee machine is the surest way to ensure a correct fit.
Delivery and returns
The part is in stock and dispatched within 24 hours from the EU, with expert technical support from our service technicians available. An unused and uninstalled part may be returned within 14 days (statutory right of withdrawal).
| Manufacturing company | De’Longhi Appliances S.r.l. |
|---|---|
| Address | Via L. Galvani, 22, 31100 Treviso TV, Italy |


