Maintenance Set XXL Premium with Lip Seals

Maintenance Set XXL Premium with Lip Seals Large gasket set with Premium lip seals for the maintenance, sealing and repair of your valuable Jura coffee machine. Incl. care cloth, hose brush, special tool and downloadable instructions. With lip seals in improved quality for smooth running and optimal sealing. For certain models, the gasket on the vacuum nozzle and the O-ring on the drainage valve are additionally required; these can be found in the recommendations. Maintenance instructions for many Jura models can be found further down under Downloads, or at the top of the page under Repair Instructions. Important service note: For older models of the E and F series with push-fit connections on the thermoblock (66820), up to 7 additional hose gaskets with Art. No.: 7758775 are required. These must be ordered additionally if needed. Scope of delivery: 2x Premium lip seal ring for the pistons of the brew group 2x Premium grooved ring in the drainage valve 10x Premium O-ring for the pressure hose 2x Premium O-ring for the riser pipe of the brew group 1x Premium O-ring inlet connector on the drainage valve 1x Premium O-ring pump connection 2x Premium O-ring steam pipe 2x retaining washers 1x Premium gasket for the water tank (inner distribution sleeve) 4x clamp water line 6x housing screws (also for the rear wall) 4x applicator for subsequent greasing of the brew group 1x oval head key as a bit insert 1x original Jura care cloth for final cleaning 1x hose brush 6g multi silicone grease food safe (-45 to 200°C)