Gasket for steam wand for DeLonghi coffee machines

If steam or water is leaking from your steam wand at the point where the milk frother attaches, or your machine has stopped frothing milk properly, a worn seal is the most common cause. This double seal sits on the plastic nozzle mounted on the steam pipe of your DeLonghi coffee machine, where the milk frother connects. It is the correct replacement part for restoring a tight joint and proper milk foam production.

Important — verify your model: before ordering, check the exact model designation and version of your machine (for example, the series code / EX suffix) on the rating plate. The plate is typically located on the underside of the machine or behind the water tank. This ensures the part will fit correctly.

When does this part need replacing? (Fault symptoms)

This part typically fails when you notice one or more of the following symptoms:

• Steam or water leaking at the point where the frother attaches to the steam wand
• The machine has stopped frothing milk or produces only thin, watery foam
• An unusual hissing sound from the wand during milk frothing due to pressure loss
• Water dripping from beneath the frother or running into the drip tray when drawing steam

Compatibility: Which models is this part for?

This part is the seal for the plastic steam wand nozzle on DeLonghi coffee machines, where the milk frother connects.

A confirmed compatibility list was not supplied with this part, so we intentionally do not list one to avoid misleading you. Before ordering, send us the model designation from your machine's rating plate and our service technicians will confirm whether this part fits your specific series (for example Magnifica, PrimaDonna, Dinamica, or ETAM Autentica).

Original vs. compatible part

Brewive supplies this replacement as the DeLonghi steam wand seal under part number 5313224911. If you are unsure about your selection, our service technicians can help verify the correct part for your model so you avoid an unnecessary order.

Delivery and returns

The part is in stock with dispatch within 24 hours from the EU, and expert technical support from our service technicians is available. An unused and un-installed part may be returned within 14 days under the statutory right of withdrawal.