Electronics for Sage coffee machines

The SP0020524 triac PCB board is an electronic control board that manages power delivery to the heating elements in the Sage Oracle and Oracle Touch (model BES990 / SES990). If your machine is overheating, has lost steam function, or the heating circuit is not switching correctly, this board is the most likely cause of the fault. This genuine replacement board is a like-for-like substitute for the original part — no modification required.

Important — verify your model: before ordering, check the exact model and version of your machine on the rating plate (model label). The label is typically found on the underside of the appliance or behind the water tank. Check the model code (for example BES990/02.12 or an SES990 variant) and confirm it matches the compatibility list below to ensure this part fits correctly.

When does this part need replacing? (Fault symptoms)

This part typically fails when you observe one or more of the following symptoms:

• The machine overheats — temperature climbs above normal and the appliance switches into safety mode (the display may show 200 °C while the actual internal temperature is significantly higher)
• The steam boiler stays warm or continues heating after the machine has been switched off (measuring standby current draw will reveal consumption above 0.9 A)
• The steam function stops working entirely, or the machine fails to reach the correct steam temperature — typically caused by a failed optocoupler or triac controlling the heating circuit
• Error messages related to steam boiler overheating appear on the display

A common root cause of this board's failure is steam leaking from the steam probes, which rises onto the board and causes damage. For this reason, when replacing the triac board we recommend inspecting the steam probe seals and condition at the same time, to prevent the fault from recurring.

Compatibility: Which models does this part fit?

This part is compatible with the following machines:

Sage the Oracle Touch series (BES990 / SES990)

• Sage the Oracle Touch BES990
• BES990/02.12
• SES990
• SES990 BSS4EEU1
• SES990 BTR4EEU1
• SES990 BST4EEU1
• SES990 NRE4EEU1

The codes listed correspond to the Sage Oracle / Oracle Touch model range. If your exact variant is not shown and you are unsure, contact our service technicians who can verify compatibility using your rating plate details.

Genuine vs. compatible part

Brewive supplies the genuine Sage replacement triac PCB board SP0020524. This is a like-for-like substitute for the original part, giving you confidence that — once the model is confirmed against the rating plate — the board will fit precisely and requires no modifications.

Delivery and returns

The part is in stock and dispatched within 24 hours from the EU; expert technical support from our service technicians is also available. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.