Controller of the brew unit movement (middle stop) for DeLonghi ECAM coffee machines

The brewing unit movement regulator (centre stop), part number 7313214521, is a mechanical component that defines the end position of the brewing unit in DeLonghi ECAM automatic espresso machines. If the brewing unit fails to seat correctly in the brewing position, the machine interprets this as a fault, will not brew coffee, and frequently discharges the ground coffee into the waste container. This part is the correct replacement when the original stop is worn or cracked.

Important — verify your model: before ordering, check the exact model designation and version (e.g. series code / EX:) on the rating label of your machine. The label is usually on the underside of the appliance or behind the water tank. Only then can you be certain this part will fit your machine correctly.

When does this part need to be replaced? (Fault symptoms)

This part typically fails when you notice one or more of the following symptoms:

• The machine does not complete the brewing cycle and displays a general error (e.g. General Alarm)
• Ground coffee falls into the waste container and the machine reports insufficient coffee, even though the correct amount was loaded
• The brewing unit does not stop in the correct position, jams, or fails to seat fully in the brewing position
• Unusual noise, grinding, or loud knocking can be heard from the machine during brewing unit movement

Compatibility: Which models is this part for?

This part is intended for DeLonghi ECAM range automatic espresso machines. An exact list of compatible models was not available for this product, so we recommend following these steps before ordering:

DeLonghi ECAM range

• The part is manufactured for the brewing units of DeLonghi ECAM range machines (e.g. the Magnifica, Dinamica, Eletta, and PrimaDonna series).
• Before ordering, note down the exact code from the rating label (e.g. ECAM 22.110.SB) and, if in doubt, send it to us — our service technicians will confirm whether this part is suitable for your model.

Original vs. compatible part

We supply a replacement part carrying the original part number 7313214521, designed for DeLonghi ECAM brewing units. The part matches the construction of the original component, so once the model has been verified it will fit in place without modification. If you are unsure, our service technicians are available to help you select the correct part.

Delivery and returns

The part is in stock and is dispatched within 24 hours from the EU; expert technical support from our service technicians is also available. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.