Control electronics for DeLonghi ESAM 03/2600-4200 coffee machines

If your DeLonghi ESAM series fully automatic coffee machine does not respond to buttons after switching on, shows no text on the display, or behaves erratically, the most common cause is a faulty control board. This DeLonghi control board with part number 5213213011 is the correct replacement part — it governs all machine functions and is supplied together with the connecting cable.

Important — verify your model: before ordering, confirm the exact model and version of your machine. The printed circuit board carries a white label with the Cod. DeLonghi, which starts with the number 52... This number must match one of the codes listed below. The rating label is normally found on the underside of the machine or behind the water tank. If your Cod. DeLonghi number is not on the list, we are happy to assist by email.

When does this part need to be replaced? (Fault symptoms)

This part typically fails when you observe one of the following symptoms:

• The machine does not switch on, or does not respond to buttons at all after switching on
• The display is blank, shows only faint backlighting with no text, or displays unreadable characters and lines
• Buttons on the control panel progressively stop responding to presses
• After switching on, all indicator lights flash briefly, the motor activates, and the machine shuts off again

Compatibility: Which models is this part for?

This part is compatible with the following DeLonghi ESAM series coffee machines:

Magnifica Series

• ESAM 02.110.SB Magnifica
• ESAM 03.105.S Magnifica
• ESAM 03.110 EX:1 Magnifica
• ESAM 03.110.S EX:1 Esperienza / Magnifica
• ESAM 03.120.S EX:1 Magnifica
• ESAM 03.126.S Magnifica
• ESAM 04.110.B Magnifica
• ESAM 04.110.S Magnifica
• ESAM 04.120.S Magnifica
• ESAM 3000.B EX:1 Magnifica
• ESAM 3000.R Magnifica
• ESAM 3200.G EX:1 Magnifica
• ESAM 3200.GD EX:1 Magnifica
• ESAM 3200.S EX:1 Magnifica
• ESAM 3200.V EX:1 Magnifica
• ESAM 3240.O EX:1 Magnifica
• ESAM 4000.B EX:1 Magnifica
• ESAM 4008.B Magnifica
• ESAM 4008.S Magnifica
• ESAM 4200.S EX:1 Magnifica

Caffè Venezia Series

• ESAM 220.S EX:1 Caffè Venezia
• ESAM 2200.S EX:1 Caffè Venezia

Caffè Corso Series

• ESAM 2600 EX:1 Magnifica Caffè Corso
• ESAM 2800.SB EX:1 Caffè Corso
• ESAM 2803.SB Caffè Corso

ESAM 2900 Series

• ESAM 2900

Genuine vs. compatible part

Brewive supplies the genuine DeLonghi 5213213011 control board including the connecting cable. Because this is an electronic component with a specific firmware version that must communicate with the machine's power electronics, it is essential that the Cod. DeLonghi on the white label of your board matches one of the codes in the compatibility list — this is what ensures correct fitment. If you are uncertain, our expert technical support team can advise.

Delivery and returns

The part is in stock and dispatched within 24 hours from the EU; our service technicians can assist with selection and installation. Please note: this is a hermetically sealed product — an unused, uninstalled part in undamaged original packaging may be returned within 14 days under the statutory right of withdrawal; once the packaging has been opened, the part can no longer be returned.