Cloth hose 140 mm for pump for Philips EP coffee machines

Is your Philips EP coffee machine losing pressure, leaking, or dripping water around the pump? A common cause is a worn or cracked hose between the pump and the boiler. This red silicone braided hose with a total length of 140 mm (part no. 421944065471P) is the correct replacement part for the Philips EP series and restores reliable water flow from the pump to the boiler.

Important — verify your model: before ordering, check the exact model designation and version of your machine (type number, e.g. EP3550 or EPxxxx/xx) on the rating label. This is usually located on the underside of the appliance or behind the water tank. This ensures the part fits your machine precisely.

When Does This Part Need to Be Replaced? (Fault Symptoms)

This part typically fails when you notice one or more of the following symptoms:

• Water leaks from under the machine or collects in the drip tray, even though the tank seals correctly
• Coffee flows very slowly, drips, or does not flow at all
• The machine has lost pressure and a hissing or whistling sound is audible when water escapes
• A crack, kink, or damp wet patch is visible on the hose near the pump

The hose between the pump and the boiler hardens, cracks, or works loose at the joint over time, causing water loss and a drop in the pressure needed for espresso extraction. If the hose is damaged, replacing it resolves both the water leak and the weak flow without any intervention on the pump itself. However, if the pump is simultaneously noisy or failing to draw water, we recommend also inspecting the pump and the seals in the water circuit.

Compatibility: Which Models Is This Part For?

This part is compatible with Philips EP series fully automatic coffee machines.

Philips EP Series

• Suitable for the Philips EP fully automatic coffee machines listed below

A specific list of compatible type numbers was not included in the input data for this part. To confirm the hose fits your machine, compare part number 421944065471P with the part in your machine, or contact us — our service technicians will verify compatibility based on your Philips EP model's type number.

Genuine vs. Compatible Part

Brewive supplies the genuine Philips replacement part no. 421944065471P. This guarantees identical dimensions, material (food-grade silicone braided hose), and correct seating in the water circuit, so the part fits precisely after installation.

Delivery and Returns

The part is in stock and dispatched within 24 hours from the EU; expert technical support from our service technicians is also available. An unused and uninstalled part may be returned within 14 days under the statutory right of withdrawal.